130mm 24V Hub motor 300rpm 8.7Nm 250W
Specifications
| Motor diameter | 130mm(Include tire size, slight deviation) |
| Rated voltage | 24V |
| Rated power | 250W |
| Rated rotating speed | 300±30rpm |
| Rated current | 6±0.5A |
| Theoretical torque | 8.7N/M |
| Degree of phases | 120° |
| Number of pole pairs | 10 pole pairs |
| Size of magnetic steel | 38M;35mmx12.2mmx3mm |
| Size of enamelled wire | Enameled copper round wire |
| Coil winding | 0.37#x3x28 |
| Size of stator core | 80# |
| Number of solts | 18 |
| Size of lead wire | 3x1.5²-5x0.1² |
| lead exposed | 300mm |
| Size of connectors | Default bullet head + XH end 2.0 plug-in |
| No-load current | ≤0.3A |
| Stater resistance | 0.58±0.01Ω |
| Withstand voltage | 0.5KV ≤10mA |
| Insulation degree | ≥500MΩ |
| Shaft material | 45 Steel |
| Out of the shaft | Double-sided threaded version |
| Waterproof rating | IP54 |
| Maximum load | 80kg |
| Environmental requirements | -20~65°C |
Write your message here and send it to us
